AVK TILTING DISC, SLANTED CHECK VALVE, PN10/16
Stainless steel metal seat
Contact
AVK Industrial Nederland BV
Schorsweg 1 8171 ME Vaassen Netherlands
Tilting disc, slanted check valve for drinking water and other neutral liquids to max. 50°C. Not for sea water or other liquids with high chloride content.
AVK tilting disc, slanted check valves are installed in pumping applications to prevent backflow in the system. All interior parts are in stainless steel or coated with drinking water approved epoxy. The slanted seat mitigates pressure surges by closing the valve before the flow reverses. In order to avoid water hammer caused by a too fast closure, the valve can be fitted with an hydraulic damping divice which operate in the last opening percentage.
| Variant 875/00-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| DN: | DN200 - DN1000 |
| PN: | PN 10/16 |
Features
-
Slanted seat reduces the risk of water hammer
- Metal seat is resistant to high temperature
- Slanted position of the seat allows very low pressure to open the disc
- Travel of disc reduced by 25% due to slanted position of the seat. closing time also reduced
- Short face-to-face dimension
- Shaft in stainless steel, 1.4021 (AISI 420)
- Bronze radial bearings
- All coatings with contact to the medium are approved for drinking water
Downloads
Reference nos. and dimensions:
| AVK ref. no. | DN mm |
Flange drilling |
A mm |
L1 mm |
D mm |
D1 mm |
D2 mm |
Dh mm |
L mm |
H3 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 875-0200-00-03100000 | 200 | PN10 | 161 | 55 | 340 | 295 | 266 | 23 | 230 | 345 | 40 |
| 875-0200-00-13100000 | 200 | PN16 | 161 | 55 | 340 | 295 | 266 | 23 | 230 | 345 | 40 |
| 875-0250-00-03100000 | 250 | PN10 | 202 | 75 | 395 | 350 | 319 | 23 | 250 | 403 | 65 |
| 875-0250-00-13100000 | 250 | PN16 | 202 | 75 | 405 | 355 | 319 | 28 | 250 | 408 | 65 |
| 875-0300-00-03100000 | 300 | PN10 | 220 | 100 | 445 | 400 | 370 | 23 | 270 | 455 | 83 |
| 875-0300-00-13100000 | 300 | PN16 | 220 | 100 | 460 | 410 | 370 | 28 | 270 | 462 | 83 |
| 875-0350-00-03100000 | 350 | PN10 | 245 | 135 | 505 | 460 | 429 | 23 | 290 | 518 | 118 |
| 875-0350-00-13100000 | 350 | PN16 | 245 | 135 | 520 | 470 | 429 | 28 | 290 | 525 | 118 |
| 875-0400-00-03100000 | 400 | PN10 | 270 | 150 | 565 | 515 | 480 | 28 | 310 | 578 | 145 |
| 875-0400-00-13100000 | 400 | PN16 | 270 | 150 | 580 | 525 | 480 | 31 | 310 | 585 | 145 |
| 875-0450-00-03100000 | 450 | PN10 | 330 | 190 | 615 | 565 | 530 | 28 | 330 | 620 | 190 |
| 875-0450-00-13100000 | 450 | PN16 | 330 | 190 | 640 | 585 | 548 | 31 | 330 | 645 | 210 |
| 875-0500-00-03100000 | 500 | PN10 | 370 | 210 | 670 | 620 | 582 | 28 | 350 | 675 | 220 |
| 875-0500-00-13100000 | 500 | PN16 | 370 | 210 | 715 | 650 | 609 | 34 | 350 | 720 | 250 |
| 875-0600-00-03100000 | 600 | PN10 | 395 | 265 | 780 | 725 | 682 | 31 | 390 | 785 | 315 |
| 875-0600-00-13100000 | 600 | PN16 | 395 | 265 | 840 | 770 | 720 | 37 | 390 | 845 | 365 |
| 875-0700-00-03100000 | 700 | PN10 | 480 | 320 | 895 | 840 | 794 | 31 | 430 | 903 | 420 |
| 875-0700-00-13100000 | 700 | PN16 | 480 | 320 | 910 | 840 | 794 | 37 | 430 | 915 | 470 |
| 875-0800-00-03100000 | 800 | PN10 | 530 | 380 | 1015 | 950 | 901 | 34 | 470 | 1023 | 640 |
| 875-0800-00-13100000 | 800 | PN16 | 530 | 380 | 1025 | 950 | 901 | 41 | 470 | 1034 | 750 |
| 875-0900-00-03100000 | 900 | PN10 | 600 | 420 | 1115 | 1050 | 1001 | 34 | 510 | 1123 | 910 |
| 875-0900-00-13100000 | 900 | PN16 | 600 | 420 | 1125 | 1050 | 1001 | 41 | 510 | 1183 | 980 |
| 875-1000-00-03100000 | 1000 | PN10 | 665 | 470 | 1230 | 1160 | 1112 | 37 | 550 | 1240 | 1150 |
| 875-1000-00-13100000 | 1000 | PN16 | 665 | 470 | 1255 | 1170 | 1112 | 44 | 550 | 1265 | 1250 |
Components
| 1. | Body | Ductile iron GJS-500-7 (GGG-50) |
| 2. | Disc | Ductile iron GJS-500-7 (GGG-50) |
| 3. | Stem | Stainless steel 1.4021 (420) |
| 4. | Bearing bush | Bronze |
| 5. | Ring | Bronze |
| 6. | Body seat | Stainless steel AISI 316L |
| 7. | Cover | Ductile iron GJS-500-7 (GGG-50) |
| 8. | Blind flange | Ductile iron GJS-500-7 (GGG-50) |
| 9. | O-ring | EPDM rubber |
| 10. | Bolt | Steel gr. 8.8, zinc plated |
| 11. | Limit stop | Carbon steel |
| 12. | Bolt | Steel gr. 8.8, zinc plated |
| 13. | Bolt | Steel gr. 8.8, zinc plated |
| 14. | Bolt | Steel gr. 8.8, zinc plated |
| 15. | Bolt | Steel gr. 8.8, zinc plated |
| 16. | O-ring | EPDM rubber |
Test/Approvals
- Tested according to EN 12266-1
- ISO 45001 certified - SAI Global Certification
- ISO 14001 certified - SAI Global Environment
- ISO 9001 certified - SAI Global Quality
Standards
- EN 1074-3
- Face-to-face dimension according to EN 558, Series 14
- Flange drilling to EN1092, PN10/16
