AVK Supa Lock™ tapping saddle, PN16
For cast iron, ductile iron and steel pipes, with Supa Lock™ socket outlet
Contact
AVK Industrial Nederland BV
Schorsweg 1 8171 ME Vaassen Netherlands
Supa Lock™ tapping saddle for cast iron / ductile iron / steel pipes for water and neutral liquids to max. 70° C
AVK Supa Lock™ is a patented service connection system consisting of tapping saddles, valves and fittings with a fast two-step assembly without threads or use of tools. Supa Lock™ features a corrosion protected push-in and quick-lock joint secured by a safety retainer which prevents demounting under pressure. The tapping saddles are designed with Supa Lock™ socket outlet and a large profiled rubber gasket to ensure a drop tight seal against the pipe. The nuts are located in a recess to ease installation and prevent them from rotating when tightening the bolts.
| Variant 100/14-003 | |
|---|---|
| Connection: | Supa Lock™ |
| Material: | Ductile iron |
| DN: | DN32 - DN32 |
| PN: | PN 16 |
Features
- Fully coated with fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901, GSK approved
- Supa Lock™ joint: Easy two-step assembly by pushing the Supa Lock™ spigot end into the Supa Lock™ socket end, and clicking on the safety retainer, which is fitted on the spigot end of the valves and fittings. The safety retainer is easy to mount and demount, and as extra safety the patented Supa Lock™ joint prevents demounting when the system is under pressure. The joint is sealed by two large O-rings of drinking water approved EPDM rubber. The O-rings are placed on the spigot ends of the valves and fittings
- The Supa Lock™ outlet is designed with rotation stop to prevent rotation during the tapping/drilling process
- Ø32 bore for standard drill bit sizes
- The saddle is sealed against the pipe by a gasket of drinking water approved EPDM rubber
- A SBR rubber lining covers the internal surface to protect the pipe surface
- Bolts of stainless steel A2 and fully epoxy coated bolt holes to protect against corrosion
- Nuts of acid-resistant stainless steel A4 with antifriction coated surface, located in a recess in the lower part
Downloads
| Supa Lock EN 2021 08 30.mp4 |
| AVK_SupaLock_video.mp4 |
Reference nos. and dimensions:
| AVK ref. no. | DN mm |
Tolerance mm |
H3 mm |
H mm |
L mm |
W mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|
| 100-067-14-320464 | 32 | 60 - 67 | 132 | 90 | 187 | 101 | 1.7 |
| 100-083-14-320464 | 32 | 76 - 83 | 150 | 100 | 187 | 101 | 1.6 |
| 100-099-14-320464 | 32 | 88 - 99 | 165 | 107 | 187 | 101 | 1.6 |
| 100-119-14-320464 | 32 | 114 - 119 | 185 | 117 | 216 | 101 | 1.8 |
| 100-171-14-320464 | 32 | 168 - 171 | 239 | 145 | 268 | 101 | 2.2 |
| 100-223-14-320464 | 32 | 219 - 223 | 292 | 172 | 320 | 101 | 2.6 |
Components
| 1. | Upper part | Ductile iron GJS-500-7 (GGG-50) |
| 2. | Gasket | EPDM rubber |
| 3. | Liner | SBR rubber |
| 4. | Washer | Stainless steel A2 |
| 5. | Nut | Stainless steel A4 |
| 6. | Bolt | Stainless steel A2 |
| 7. | Lower part | Ductile iron GJS-500-7 (GGG-50) |
Test/Approvals
- Approved according to ACS-France
- Belgaqua approved material
- ISO 45001 certified - SAI Global Certification
- ISO 14001 certified - SAI Global Environment
- ISO 9001 certified - SAI Global Quality
Use with this product
AVK Supa Lock™ service connection valve, DI, PN16
For side tapping with Supa Lock™ spigot end/Supa Lock™ socket end, DN32
AVK Supa Lock™ straight fitting w. PRK coupling, brass, PN16
For PE pipes, Supa Lock™ spigot end / PRK coupling
AVK Supa Lock™ straight fitting w. screw coupling, brass, PN16
For PE pipes, Supa Lock™ spigot end / screw coupling
AVK Supa Lock™ straight push-in fitting, PN16
For PE pipes, Supa Lock™ spigot end/push-in socket end
